DSC 3070 GSM PDF

3G Universal Cellular Wireless Alarm Communicator 3GRF 3G -ADT ADT DSC GSM 3G Universal Cellular Backup Wireless Alarm Communicator. The DSC 3G universal wireless alarm communicator uses the HSPA 3G cellular network to transmit signals has been discontinued. The DSC’s 3G has. GSVAH Sealed Lead Acid Alarm Battery for the DSC 3G cellular 3G alarm DSC Wireless Cellular 3G GSM Alarm Communicator (3G).

Author: Mijar Vumi
Country: Italy
Language: English (Spanish)
Genre: Literature
Published (Last): 10 April 2004
Pages: 242
PDF File Size: 7.60 Mb
ePub File Size: 19.53 Mb
ISBN: 278-5-59125-454-6
Downloads: 6922
Price: Free* [*Free Regsitration Required]
Uploader: Yosida

DSC 3G3070 Installation Manual

This manual contains information on limitations regarding product use and function and information on the limitations as to liability of the manu- facturer. The entire manual should be carefully read. 0370 wiring must be routed in a manner that prevents: Electrical current drawn from this terminal is drawn directly from the power supply. This must be added to the 3G current when determining the total draw on the host panel or power supply. Jumper JP3 does not limit the electrical current available on this output.

HSPA (3G) Universal Cellular Alarm Communicator – 3G Security Products | DSC

If this LED flashes, the following list indicates the specific trouble based on the number of flashes, by priority. When turned on, the 3G checks for the trouble conditions to be restored in the order listed below.

  LPCB RED BOOK PDF

The 3G indicates the status of the highest priority, unrestored trouble condition with the corresponding number of flashes of the red LED. After the 3G generates 0370 Kiss-off signal, it sends the next alarm or, if no further alarms need to be sent, the control panel goes on-hook.

The 3G has four open collector outputs capable of a maximum of 50mA. Internal events on the 3G can trigger the outputs to turn on an LED or activate an input on the host panel. The gssm settings are as follows. YELLOW light will flash one time when the signal is transmitted and two times when it bsm a kiss-off.

The 3G will not show signal strength until the SIM is active. Once the 3G low battery trouble condition is corrected, the red light will then begin flashing four times.

GSVAH – DSC 3G Cellular 3G Alarm Communicator Sealed Lead Acid Battery

When powering the 3G Radio by an DSC Software purchased with or without Products and Components is copyrighted and is purchased under the following license terms: This equipment generates and uses radio frequency energy the end user. Access cards or tags returned for replace- purchase, the product shall be free of defects in materials ment under warranty will be credited or replaced at DSC’s and workmanship under normal use. During the warranty option.

Products not tsm by this warranty, or other Also See for 3G Installation manual – 24 pages. Page of 23 Go. This manual contains information on limitations regarding product. Table of Contents Add 300 my manuals Add.

  DRINK PLAY [email protected]#K PDF

Table Of Contents Installing the 3G Description 4 hours standby power capabilities. Outputs The 3G has four open collector outputs capable of a gs, of 50mA.

Page 13 3G low battery trouble one flash and an insufficient signal strength trouble four flashes are present; the red light will flash one time. Page 17 – 24h Test Transmission must be enabled on the dialler and on the 3G Page 22 This equipment generates and uses radio frequency energy the end user. Page 23 Access cards or tags returned for replace- purchase, the product shall be free of defects in materials ment under warranty will be credited or replaced at DSC’s and workmanship under normal use.

Comments to this Manuals Your Name. Enter text from picture: By pressing ‘print’ button you will print only current page. To print the manual completely, please, download it.

Don’t show me this message again.

Got it, continue to print. Don’t have an account?